Flexo printing, due to its unique printing process and extensive substrate compatibility, utilizes a variety of ink types and must be selected in accordance with printing materials, reprocessing requirements and environmental standards. Types of inks commonly used in flexographic printing and their characteristics are as follows:
1.Water-Based Ink
Features:
Environment: Emissions of volatile organic compounds (VOCs) are extremely low (typically less than 5%) using water as a solvent and comply with environmental standards such as EU REACH, US EPA and China GB/T 38597.
Drying Speed: Dry by hot air (60-80°C) or infrared, drying speed a moderate rate (0.5-2 seconds), suitable for high speed printing (150-300 m/min).
Adhesion: Strong adhesion to paper, cardboard, and some plastics such as pre-treated PET and BOPP, but consideration should be given to the substrate's surface tension (≥ 38 mN/m required).
Cost: Raw materials are cheap but require efficient drying equipment, so overall costs are modest. Application:
Food packaging (e.g. candy wrappers, bread bags), pharmaceutical packaging, labels for everyday chemicals.
Corrugated preprint and paper cup printing.
Typical products:
Germany's Siegwerk's AquaCode series water-based inks has excellent abrasion and adhesion resistance.
US-based Sun Chemical's SunSpectro series suitable for narrow-band web-label printing.
ii. Solvent-Based Inks
Features:
Drying Speed: Extremely fast evaporation by solvent (0.1-0.5 seconds), suitable for non-absorbent materials (e.g. plastic film, metal foil).
Water resistance: Water, oil and chemical resistance, suitable for outdoor use or harsh environment.
VOC Emissions: Traditional solvent inks have high levels of volatile organic compounds (VOCs) (30-50%) and require exhaust gas treatment system (an RTO incinerator).
Cost: Although the ink is relatively cheap, but the investment in environmental protection equipment is higher, resulting in higher overall costs. Application:
Industrial labelling (e.g. chemical and lubricant packaging), outdoor advertising films and flexible packaging (e.g. laundry detergent).
Food packaging requiring high temperature distillation (e.g., distillation pouches at 121°C).
Typical products:
Japan's DIC's Solvent Flex series offers fast drying and high gloss.
Germany's Hubergroup's EcoSolvent series offers low odour and low migration.
III. UV Ink
Features:
Curing method: UV light (wavelength 200-400nm) triggers a photopolymerization reaction and instant curing without solvent evaporation (0.01-0.1 seconds).
Printing Results: high gloss, abrasion resistance, scratch resistance, suitable for high precision printing (e.g., dot reproduction 1-99%).
Material Compatibility: Suitable for printing a variety of materials, including paper, plastic, metal and glass, provided the substrate is photopermeable (or uses UV-transmitting ink).
Cost: Although the ink is more expensive, but do not require drying equipment, both energy and space savings. Application:
High-end labels (such as wine and cosmetics labels), foldable cardboard boxes and soft packaging (such as aluminum foil laminates).
Special effects printing (such as abrasive, icing and spot UV varnish).
Typical products:
Flint Group's Nyloflex series UV inks has excellent flexibility, suitable for film printing.
Marabu's UV-Flex series offers low mobility and meets food exposure standards.
IV. INTRODUCTION LED UV Inks
Features:
Curing technology: Curing with LED cold light source (wavelength 365-395nm), 60-80% more energy efficient than traditional UV lamps, no ozone generation.
Temperature control: LED light sources can produce low temperature, prevent substrate deformation (such as thermal materials and films).
Curing speed: Instantaneous curing (0.01 seconds), support for high-speed printing (over 400 m/min).
Cost: LED devices have higher initial investment but lower long-term operating costs. Application:
Print thin materials (e.g. 0.02mm PET film) and thermosensitive materials (e.g. PVC and synthetic paper).
Short-term printing, quick delivery required.
Typical products:
Japan's T&K Toka LED-Cure series has high adhesion and low odour.
Switzerland's SICPA SecureUV LED series, designed specifically for security printing.
V. Electron Beam (EB) curing inks
Features:
Curing method: Bombing ink with a high-energy electron beam (150-300keV) to initiate polymerization. No photoinitiator, complete curing, no residue.
Eco-friendly: VOC has zero emissions and meets the most stringent environmental requirements.
Durability: Chemical corrosion resistant, suitable for long-term outdoor use.
Cost: Expensive equipment (electron beam accelerator required) for mass production only.
Application:
High-end soft packaging (such as pharmaceutical packaging, food composite film), industrial roll (such as painted steel sheets, aluminum foil).
Packaging that requires high temperature sterilization or long-term storage. Typical products:
The EB-Flex family of UV rays in the United States provides high flexibility and steaming resistance.
BASF's Joncryl series EB inks is suitable for film printing.
VI. INTRODUCTION Special Functional Inks
Edible Inks
Ingredients: Natural pigments (e.g. beetroot red pigment, chlorophyll), edible solvents (e.g. ethanol, water).
Usage: Used for packaging and printing of candy, medicine and gum. Must conform to GB4806.7-2016.
Thermo-/Optically Variable Inks
How it works: Reveal hidden information (such as anti-counterfeiting labels) through changes in temperature or light.
Application: high-end packaging, ticketing, securities printing.
Conductive Inks
Ingredients: Conductive materials such as silver powder and carbon nanotubes. Can be used to print circuit patterns.
Application: RFID label, intelligent packaging, flexible electronic equipment.
VII. Key factors in Ink Selection
Substrate Type
Paper/Cardboard: Preferably water-based ink (low cost, environmentally friendly).
Plastic film: Solvent, UV or LED UV inks are selected according to surface tension. Metal/ glass: Special UV or EB inks are required.
Post-Processing Requirements
Layering/ hot stamping: Choose quick-drying solvent or UV ink to avoid adhesion.
Die-cutting/Slitting: Ink after curing must maintain a moderate flexibility to prevent brittle cracking.
Environmental Regulation
Food packaging: FDA and GB 4806 certified inks must be used.
Exports to Europe: subject to REACH, Swiss Ordinance and other standards.
Printing speed
High-speed printing (> 300m/min): LED UV or solvent based ink is preferred.
Low speed printing (<150m/min): Hydrating inks provide a more cost-effective solution.
What Inks Are Used in Flexographic Printing?
Aug 15, 2025
Leave a message
Send Inquiry

