News

How To Identify Flexographic Printing?

Oct 01, 2025 Leave a message

flexographic printing can be recognized by observing the characteristics of printed products, analyzing the printing process, combining with industry application scenarios, and utilizing specialized inspection tools or methods. Specific identification methods and points are as follows:
1.Observe the surface properties of printed matter
Ink Layer Thickness and Tactile Feel
Features: Flexographic printing using low-viscosity water-based or UV inks. The ink is transferred to the printing plate by measuring, passing through an anilox roller, which is then printed on a substrate. As a result, the surface of the printing ink layer is very thin, there is no noticeable bulge (compared to letterpress printing ink layer thicker).
For example, words or images on food packaging feel smooth and lack stereoscopic feel.
Dot Morphology and Precision
Features: Flexographic printing dots has a "flat roof" structure (due to laser platemaking technology can directly ablate the surface of the plate). Point edge sharp, highlight dots is not easy to lose, shadow dots is not easy to blur.
Compare: Offset printing dot has "dome" structure, gravure printing dots has "crater" structure. METHODS: The dot morphology of the print was observed using a magnifying glass (e.g., 10x or above). Flexible version of the edge of the screen should be sharp, there should be no serrated or fuzzy texture.
Color Saturation and gradient
Features: The color saturation flexographic printing is slightly lower than that of gravure printing due to thin ink layer. However, it can achieve subtle gradients (such as gradient effects) through high-precision anilox rollers and digital color management.
For example, the gradient background on a beverage label has a natural, seamless color transition.
ii. Characterization of Printing Process
Substrate Adaptability
Features: Flexographic printing can be used on a variety of substrates, including paper, plastics (such as BOPP and PET), metal foils, self-adhesive labels and corrugated paper.
Application:
Films: food packaging bags, beverage labels, chemical packaging for daily use.
Paper: Tote bags, woven bags, paper boxes, trademarks, stickers.
Specialties: Drug packaging, electronic product labels, tyre labelling. Printing Speed ​​and Efficiency
Features: Flexographic printing presses (especially satellite and combination printing press) can print at speeds of 300-500m/min and are suitable for large, long-cycle printing.
Comparison: Digital printing is slower (typically less than 100m/min), so it's better for shorter printing times.
Environmental protection
Features: Flexographic printing uses a variety of water-based and UV inks with low volatile organic compound (VOC) emissions and meets environmental standards (e.g. EU REACH and China GB/T38597).
Test method: Smell the printing product; flexographic printing does not have a distinct pungent odor (gravure printing has a stronger odor due to solvent inks).
III. Application Scenarios
Food packaging
Typical products: Chip bags, Candy Packaging, Milk Cartons, Instant Noodle Bowl Lids
Key Identification Points:
packaging surface smooth, bright color, no ink accumulation phenomenon.
The printed product wear and wash (due to strong adhesion of water-based ink). Japanese-made packaging
Typical products: shampoo bottle labels, laundry detergent packaging, makeup box.
Key identification points:
Labels must be fastened without bubbles or curls (flexographic printing allows inline die-cutting, resulting in high label precision).
Printed materials must be chemical-resistant (e.g. alcohol and detergents).
Logistics packaging
Typical products: corrugated carton, courier bags, self-adhesive waybills.
Key identification points:
Printed lines on the surface of cartons must be clear, without ghosting or blurring (flexographic printing provides a high accuracy of registration).
Waybill information must be variable (flexographic printing supports variable data printing, such as barcodes and QR codes).
IV. INTRODUCTION INTRODUCTION Professional Inspection Tools and methods
magnifying glass or microscope
Objective: To observe dot morphology, ink layer thickness and overprint accuracy.
OPERATIONS: Place the printouts under a magnifying glass and adjust the focus until the dot is visible. Compare the dot difference between flexo and other printing methods.
Densitometer or spectrophotometer
Objective: To evaluate the effectiveness of color management by measuring ΔE color density and color difference of printed matter. Criterion: color density in Flexographic printing is usually lower than in gravure printing, but color difference can be controlled in ΔE ≤ 3 (according to international printing standards).
Friction testers
Purpose: To test the adhesion and abrasion resistance of ink.
Methods: The standard abrasive tip was rubbed many times before and after printing, and the the exfoliation of flexo printing ink was observed.
V. Comparison of Flexographic with other Printing Methods
Typical Application of Printing Method & Environmental Protection Application of Printing Method Ink Layer Thickness and Point Form Substrates
Flexographic Printing: Thin Flat-Top Dots Paper Thin Thin Film Self-adhesive Self-Adhesive Labels High Food Packaging Label
Gravure Printing: Thick Denim Dot Film, Metal Foil Low Cigarette Packaging, Premium Gift Packaging
Offset: Medium Round-Top Dots Paper, cardboard, medium catalogue, posters
Digital Printing: Ultra-Thin No Fixed Dots Paper, Film High Personalized Labels, Sprint

Send Inquiry