1. The hardness of the rubber plate of the flexo printing machine is determined by the temperature, pressure, pressurization time, etc. during vulcanization and hardening. The hardness of the printing plate can be determined according to requirements. The hardness of the photosensitive resin plate depends on the hardness of the photopolymer, which can be controlled by adding a hardness control agent. Elasticity is the inverse indicator of hardness, that is, the higher the hardness, the smaller the elasticity.
2. Different printing materials have different requirements for the hardness of the printing plate. If the printing plate has high elasticity, the contact with the substrate will be even, and the printed ink color will also be uniform. However, the level reproducibility of the image will be poor, and the dot expansion will be more significant. If the surface of the substrate is smooth, the elasticity of the printing plate should be small; if the surface of the substrate is rough, the elasticity of the printing plate should be large. When printing solid or text, the printing plate elasticity should be larger; when printing dots or thin lines, the printing plate elasticity should be smaller.
3. The elasticity of the printing plate of the flexo printing machine will change to a certain extent during the printing process. That is, after high-speed and long-term continuous printing, the elasticity of the printing plate decreases and the rebound is insufficient. In order to avoid the elasticity of the printing plate decreasing too much, It is required to maintain light pressure during printing.

